| |
| |
| microwave RF repeater
questions |
|
| Q.1 |
Can
the Microwave RF Repeater handle
OC3 traffic / Sonet / ATM data rates? |
|
| Q.2 |
Can
we use the radio manufacturers
alarm unit (i.e. Alcatel MCS 11
alarm) to monitor the repeater
(or do they have to buy the RMAS-120)? |
|
| Q.3 |
What
are the advantages of using your
active repeater system over a billboard
passive system? |
|
| Q.4 |
Do
most customers use the monitoring
option, or just depend on the radios
at either end to find a fault? |
|
| Q.5 |
Why
is 12-volt power used for repeaters? |
|
| Q.6 |
What
are the United States licensing
requirements for the repeater link,
are they just coordinated like
regular radios? |
|
| Q.7 |
Is
the equalization just for equalizing
the repeater or is it a full blown
Channel equalizer? |
|
| Q.8 |
What
models have delay equalization
available? |
|
| Q.9 |
Are
the amplifiers in the repeaters
class A? Are they low noise high
power modules? |
|
| Q.10 |
We
are backing down the output power
depending on the modulation so
as not to distort the signal. How
hard are these numbers?
I understand that there is 5 dB
of gain compression to handle upfades,
but if we go over that, do the
amps just start degrading the signal
or is there a hard cutoff point? |
|
| Q.11 |
What
do you recommend people do about
keeping the waveguide and feedhorns
dry? |
|
| Q.12 |
How
does Frequency Diversity work in
an RF Repeater? |
|
| Q.13 |
How
does Space Diversity work in an
RF Repeater? |
|
| Q.14 |
How
does the Remote Monitoring and
Alarm unit transmit it’s
signal? |
|
| Q.15 |
If
you have an existing path with
terminal radios and you want to
add a repeater in the middle of
this path do you need to re-coordinate
/ get new license? |
|
|
|
|
|
| |
|
| |
|
| |
For
your convenience, Peninsula
Engineering Solutions has put
together some of the more frequently
asked questions for fast answers.If you still don't find the answers to your
questions, feel free to email Peninsula
Engineering Solutions at anytime. |
|
|
|
| |
|
|
|
|
|
|
| |
|
